Analisis Metode dalam Pengemasan Obat Primer dan Sekunder di Industri Farmasi

Fayza Nindya Nur’Assyfa; Nia Kusumadewi; Nor Latifah

doi:10.61132/vitamin.v3i3.1473

Authors

Fayza Nindya Nur’Assyfa Universitas Muhammdiyah Banjarmasin
Nia Kusumadewi Universitas Muhammdiyah Banjarmasin
Nor Latifah Universitas Muhammdiyah Banjarmasin

DOI:

https://doi.org/10.61132/vitamin.v3i3.1473

Keywords:

Lean Manufacturing, Single Minute Exchange of Dies, Overall Equipment Effectiveness, Primary Packaging, Secondary Packaging

Abstract

Optimization of primary and secondary packaging is crucial for the quality and efficiency of drug production. The drug packaging process consists of primary packaging that is in direct contact with the product and secondary packaging that provides additional protection and important information. This study aims to analyze various methods applied in pharmaceutical packaging to assess the effectiveness of Lean Manufacturing (VSM), Single Minute Exchange of Dies (SMED), and Overall Equipment Effectiveness (OEE). This study shows that VSM significantly reduces the time of secondary packaging activities. SMED reduces the lead time of primary packaging analysis by 58.06%. Meanwhile, OEE analysis of primary packaging identified high set-up/adjustment as the main cause of losses. The importance of implementing structured methods to increase productivity, reduce waste, and ensure a more efficient and effective packaging process in the pharmaceutical industry, contributing to improving product quality and safety.

Downloads

Download data is not yet available.

References

Almomani, M. A., Aladeemy, M., Abdelhadi, A., & Mumani, A. (2013). A proposed approach for setup time reduction through integrating conventional SMED method with multiple criteria decision-making techniques. Computers & Industrial Engineering, 66(2), 461–469. https://doi.org/10.1016/j.cie.2013.07.011

Chuensunk, P., Puttibarncharoensri, P., & Tantisiriphaiboon, Y. (2018). An application of value stream mapping to improve a purchase order process. Journal of Supply Chain Management, 12(1), 52–65.

Daniyan, I., Adeodu, A., Mpofu, K., Maladzhi, R., & Kana-Kana Katumba, M. G. (2022). Application of lean Six Sigma methodology using DMAIC approach for the improvement of bogie assembly process in the railcar industry. Heliyon, 8(3), e09043. https://doi.org/10.1016/j.heliyon.2022.e09043

Ekawati, A. Y., & Husni, P. (2018). Analisa overall equipment effectiveness (OEE) pada proses pengemasan primer di industri farmasi. [Artikel tidak dipublikasikan atau detail jurnal tidak lengkap]

Haifa, A. I., & Permatasari, N. F. (2020). Pengurangan lead time analisa kemasan primer flexy bag dengan metode Single Minute Exchange of Dies (SMED) di industri farmasi X. [Artikel tidak dipublikasikan atau detail jurnal tidak lengkap]

Haris, S., & Rijal, H. (2023). Evaluasi kinerja mesin produksi menggunakan metode OEE pada industri pengolahan makanan. Jurnal Rekayasa Sistem Industri, 51(4), 89–101.

Hidayat, M., & Aryanto, I. (2022). Penerapan metode OEE pada mesin pengolahan makanan untuk meningkatkan efisiensi produksi. Jurnal Teknologi Industri, 58(3), 122–134.

Kumar, R. (2021). Industrial equipment efficiency and performance: A comprehensive guide to OEE. [Penerbit tidak disebutkan].

Lianny, I. K. M., Purbaningrum, S. P., & Solih, E. S. (2022). Implementation of Single Minute Exchange of Dies at PT Ganding Toolsindo. ACM International Conference Proceeding Series. https://doi.org/10.1145/3557738.3557830

Nugroho, M. Z. P., Hasibuan, S., & Adiyatna, H. (2021). Application of lean manufacturing to improve procurement lead time in the case of the steel industry. IOP Conference Series: Materials Science and Engineering, 1010(1), 12–22.

Ondra, P. (2022). The impact of Single Minute Exchange of Die and Total Productive Maintenance on overall equipment effectiveness. Journal of Competitiveness, 14(3), 113–132. https://doi.org/10.7441/joc.2022.03.07

Prasetyo, A. M., Prasetio, D. E. A., & Lombardo, D. (2024). Perbaikan proses pengemasan sekunder untuk mengurangi aktivitas waste dengan metode lean manufacturing di PT. XYZ. [Artikel tidak dipublikasikan atau detail jurnal tidak lengkap]

Pratama, I. R., Sumasto, F., Imansuri, F., & Purwojatmiko, B. H. (2023). Reduksi waktu set up pekerjaan penggantian ban sepeda motor dengan metode Single Minute Exchange of Dies. Jurnal Serambi Engineering, 8(4), 7310–7316. https://doi.org/10.32672/jse.v8i4.6854

Priyambodo, B. (2007). Manajemen farmasi industri. Global Pustaka Utama.

Setyawan, L. (2019). Increasing the production capacity of copper drawing machine in the cable industry using SMED method: A case study in Indonesia. Operations Excellence: Journal of Applied Industrial Engineering, 11(3), 217. https://doi.org/10.22441/oe.v11.3.2019.031

Sholeh, M. N., & Fauziyah, S. (2018). Current state mapping of the supply chain in engineering procurement construction (EPC) project: A case study. MATEC Web of Conferences, 195, 6–15.

Silva, A., Sá, J. C., Santos, G., Silva, F. J. G., Ferreira, L. P., & Pereira, M. T. (2021). A comparison of the application of the SMED methodology in two different cutting lines. Quality Innovation Prosperity, 25(1), 124–149. https://doi.org/10.12776/QIP.V25I1.1446

Sumasto, F., Arliananda, D. A., Imansuri, F., Aisyah, S., & Pratama, I. R. (2023). Fault tree analysis: A path to improving quality in part stay protector A comp. Journal Européen des Systèmes Automatisés, 56(5), 757–764. https://doi.org/10.18280/jesa.560506

Widiantoro, B. C. (2015). Upaya minimasi waste pada proses pengadaan barang/jasa di PT Pertamina Hulu Energi (PHE) menggunakan lean service. Jurnal Operation Excellence, 7(1), 82–91.