Gambaran Kesesuaian Alat Kerja dengan Antropometri Pegawai Dinas Kesehatan Kabupaten Belu
DOI:
https://doi.org/10.61132/vitamin.v3i2.1299Keywords:
Anthropometry, Ergonomic, Work ToolsAbstract
How well the ergonomic work tool fits the human size determines how comfortable and uncomfortable it is to use it. Determining the suitability of the work tool with the anthropometry of the employees of the Belu District Health Office is the purpose of this study. Descriptive methods combined with quantitative approaches are used in this kind of research. 30 participants are the population and sample used in this study, which includes seven types of chairs and all sampling techniques. The findings of the study showed that, among the staff of the Belu District Health Office, 12 (40%) were male and 18 (60%) were female in terms of anthropometric measurements. The dimensions of the 7 types of chairs used by male employees are categorized as appropriate because the height of the chair legs with the height of the employee's knees are included in the anthropometric measurements. While for female employees, the appropriate one is a computer chair because the height of the chair legs can be adjusted according to the needs of female employees in anthropometric measurements. The most common type of complaint is in the mild category with 17 people (56.7%), the moderate category with 12 people (40%), and the severe category with 1 person (3.3%).
Downloads
References
Akhmad, S. (2017). Perancangan kursi ergonomis untuk memperbaiki posisi kerja pada proses packaging jenang Kudus [Skripsi, Universitas Muria Kudus].
Akhmad, S., & Sugiharto, W. H. (2018). Perancangan kursi ergonomis untuk mengurangi keluhan pembatik pada UKM Batik Alfa Shoofa Kudus. Universitas Muria Kudus.
Andhini, V. (2018). Hubungan antropometri dengan kursi kerja di Kantor Pelayanan Perbendaharaan Negara Mojokerto. The Indonesian Journal of Occupational Safety and Health, 7(2), 200–209.
Barir, M. (2020). Rancangan pengembangan kursi antropometri menggunakan metode Pahl & Beitz [Skripsi, UIN Sunan Kalijaga Yogyakarta].
Budhyanti, W., Anggiat, L., & Juwita, C. P. (2019). Panduan peregangan mandiri untuk pencegahan dan penanganan awal nyeri leher dan punggung bawah. UKI Press.
Denaneer, T. (2022). Hubungan ergonomisitas kursi dengan keluhan muskuloskeletal pada pekerja di perusahaan X di Jambi. OKUPASI: Scientific Journal of Occupational Safety & Health, 2(1), 34–42.
Ismianti. (2016). Perbandingan karakteristik antropometri mahasiswa Suku Jawa dan Suku Batak di Indonesia. Jurnal Ergonomi Indonesia. (Article received: 23 November 2019; accepted: 30 Desember 2019; published: 31 Desember 2019).
Mur, S. (1987). Hiperkes keselamatan kerja dan ergonomi. Dharma Bakti Muara Agung.
Ningrum, C. A. P., et al. (2023). Desain kursi ergonomi pada pekerja sortir di Departemen Blow Molding PT. Albea Rigid Packaging Surabaya (PT. ARPS). Jurnal Ilmu Kesehatan dan Keperawatan, 1(3), [Agustus], 1–10. https://doi.org/10.59581/diagnosa-widyakarya.v1i2
Nurmianto, E. (1986). Ergonomi: Konsep dasar dan aplikasinya (Edisi pertama). Guna Widya Jakarta.
Pardede, D. M., Matondang, A. R., & Listiani, N. H. (2019). Analisis ergonomi desain kursi kerja karyawan di PT. YYY. Jurnal Teknik Industri FT USU, 8(2), 14–18.
Pheasant, S. (1987). Bodyspace: Antropometri, ergonomics and design. London.
Prasetyani, R., & Nuryana, D. R. (2018). Perancangan kursi kerja untuk mengurangi kelelahan pada proses penimbangan bagian quality control di PT. Novell Pharm Lab. Prosiding Seminar Rekayasa, 614–622. https://teknik.univpancasila.ac.id/semrestek/2018/assets/proceedings/sm/SEMRESTEK2018_paper_97.pdf
Prayogo, D., & Sutikno, S. (2022). Pencegahan terjadinya low back pain (LBP) terkait duduk yang benar pada mahasiswa STIKES Suaka Insan Banjarmasin. Jurnal Suaka Insan Mengabdi (JSIM), 3(2), 56–63. https://doi.org/10.51143/jsim.v3i2.303
Profil Dinas Kesehatan Kabupaten Belu Tahun 2023.
Putri, T. A., Ramadhan, M. N., & Ma, M. (2018). Perancangan kursi kerja menggunakan pendekatan antropometri sebagai solusi keterbatasan ibu hamil dalam bekerja. Seminar dan Konferensi Nasional IDEC, 7–8.
Ramahdani, R. (2017). Pengaruh sikap kerja duduk pada kursi kerja yang tidak ergonomis terhadap keluhan otot-otot skeletal bagi pekerja wanita. Jurnal Keperawatan Flora.
Santoso, A., & Anna, B. A. P. (2014). Perancangan ulang kursi antropometri untuk memenuhi standar pengukuran. Jurnal Program Studi Teknik Industri (PROFISIENSI), 2(1), 81–91. https://www.journal.unrika.ac.id/index.php/jurnalprofisiensi/article/view/317
Santoso, G. (2001). Ergonomi manusia, peralatan dan lingkungan. Surabaya.
Wijaya, M. A., & Anissa, P. (2016). Analisa perbandingan antropometri bentuk tubuh mahasiswa pekerja galangan kapal dan mahasiswa pekerja elektronika. Universitas Riau Kepulauan Batam.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Vitamin : Jurnal ilmu Kesehatan Umum
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
